Asphalt Shingle Roofing
Looking for a way to give your home some much-needed style? Look no further than asphalt shingle. Asphalt shingles are affordable for homeowners and are available in various colors. They're easy to maintain and can easily be replaced when they eventually wear out.
This guide provides a step by step guide on how you can install asphalt shingles at your home and also where to get professional help while in Franklin Michigan. What are Asphalt Shingles? |
|
Asphalt Shingles are thin roofing panels installed on a roof to protect the home from severe weather conditions and maintain its temperature and decor. They are made of three layers. The first layer is a felt backing that gives it strength, the second is made of felt fibers and asphalt (which keeps it flat), and the third layer is the texture coating.
How do you install asphalt shingles?
Installation is pretty easy. The basic steps are:
1. Measure the roof to figure out how many shingles you need.
2. Mark out the locations of the first row of shingles from a ladder or ground level.
3. Install the first row and seal it with roofing nails and caulk. Repeat for all rows up to the ridge cap.
4. Install shingles up to the ridge cap on a two-foot overhang on each side, filling in with underlayment behind them if necessary.
5. Install a drip edge on the front and back of the roof to prevent water from running down on the shingles.
6. Nail the shingles using a hammer, pneumatic gun, and aluminum nails (sold separately).
7. Waterproof the shingles with a sealant layer and let them dry for 24 hours.
8. Lastly, apply a top coat of asphalt sealer. This step is unnecessary, but it ensures that your asphalt roof stays in good shape for years.
How do you start laying asphalt shingles?
The best way to lay asphalt shingles is to start laying them from the bottom up. This way, you'll be able to cut the shingles to length easily without needing a helper. Lay them overlapping each other by about half an inch or so. You can always come back and remove any crooked ones later on.
What do you put under asphalt shingles?
If you're using asphalt shingles, you must have something underneath them. This could be another layer of shingles or a different material, such as wood strips or roll roofing.
Generally, it is recommended to use three layers: the first is an underlayment membrane, which protects the asphalt shingle and can help to prevent leaking. The second layer is your adhesive tape, which helps lock the shingles and keep them from moving. The third layer is the shingles.
Installing asphalt shingles is an inexpensive way to add color to your home. They are affordable and easy to install, with no danger of leaks or problems as you can get with cheap asphalt shingles. While it is possible to install asphalt shingles by yourself, it is highly recommended that you hire a professional roofer if you are not incredibly experienced or want the job done without incident. At Intrepid Roofing, we are the leading company in Franklin, MI, that offers professional installation of all types of asphalt shingles. Don't hesitate to contact us today for a free quote on our professional installation of asphalt shingles!
Proud Partners:
Toiture Drummondville
How do you install asphalt shingles?
Installation is pretty easy. The basic steps are:
1. Measure the roof to figure out how many shingles you need.
2. Mark out the locations of the first row of shingles from a ladder or ground level.
3. Install the first row and seal it with roofing nails and caulk. Repeat for all rows up to the ridge cap.
4. Install shingles up to the ridge cap on a two-foot overhang on each side, filling in with underlayment behind them if necessary.
5. Install a drip edge on the front and back of the roof to prevent water from running down on the shingles.
6. Nail the shingles using a hammer, pneumatic gun, and aluminum nails (sold separately).
7. Waterproof the shingles with a sealant layer and let them dry for 24 hours.
8. Lastly, apply a top coat of asphalt sealer. This step is unnecessary, but it ensures that your asphalt roof stays in good shape for years.
How do you start laying asphalt shingles?
The best way to lay asphalt shingles is to start laying them from the bottom up. This way, you'll be able to cut the shingles to length easily without needing a helper. Lay them overlapping each other by about half an inch or so. You can always come back and remove any crooked ones later on.
What do you put under asphalt shingles?
If you're using asphalt shingles, you must have something underneath them. This could be another layer of shingles or a different material, such as wood strips or roll roofing.
Generally, it is recommended to use three layers: the first is an underlayment membrane, which protects the asphalt shingle and can help to prevent leaking. The second layer is your adhesive tape, which helps lock the shingles and keep them from moving. The third layer is the shingles.
Installing asphalt shingles is an inexpensive way to add color to your home. They are affordable and easy to install, with no danger of leaks or problems as you can get with cheap asphalt shingles. While it is possible to install asphalt shingles by yourself, it is highly recommended that you hire a professional roofer if you are not incredibly experienced or want the job done without incident. At Intrepid Roofing, we are the leading company in Franklin, MI, that offers professional installation of all types of asphalt shingles. Don't hesitate to contact us today for a free quote on our professional installation of asphalt shingles!
Proud Partners:
Toiture Drummondville